This issue can be caused by improper positioning of the cables in the WAN/LAN NICs.
- Switch the cables and see if direct traffic (non-proxied, port 80) shows up in the Real-Time Monitor.
If the issue persists, please contact Technical Support.
Network Configuration
Forwarding of X11 source IP information can be enabled by editing the proxy.cfg file.
- Navigate to C:\Wavecrest\CyBlock\wc\cyblock\db.
- Stop the CyBlock service.
- Open proxy.cfg in an editor such as NotePad.
- Between the <TOP> and </TOP> entires, add the following line:
- <param keyword=”xforward_enabled” value=”true” />
- Restart the CyBlock service.